Jason:18664379879
Email:jiangsheng@hakrc.com
HAKRC 35A miniF7 Fly Tower
Previous article:40A miniF4 Fly Tower
Next article:35A miniF4 Fly Tower

Product Details

    35A Mini F7V2 flying tower is equipped with BLS 35A four-in-one ESC F722 flight control,Installation hole spacing of 20 20mm.F722 flight controller is equipped with 6 UARTs, MPU6500 IMU, OSD, F.Port many other functions!Built-in plug-in allows you to easily connect to the DJI FPV Air System.Integrated 16Mb black box, barometer, upgraded Type-C USB interface, greatly improve socket life reduce the risk of poor contact. Supports various receivers including Sbus,ELRS, PPM, CRSF, DSMX, iBus, DUMD, etc.

    HAKRC 35A miniF7 Fly Tower 第 1 张  F722 FC Specifications:

    Size: 29 39mm (20mm-20mm mounting hole)

    package size: 64 64 35mm

    input voltage: 2S-6S LIPO

    product net weight: 6g

    package weight: 37g

    CPU: STM32F405RET6

    IMU: ICM42688 dual gyroscope

    OSD: AT7456E

    barometer: Integrated 

    Black Box: 16MB

    EC: 5V/2A

    BEC: 10V/2A

    LED: support external adjustable LED 

    sensor: built-in current sensor

    firmware version: HAKRCF722V2

    receiver: Frsky/Futaba/Flysky/TBS Crossfire/DSMX: DSM2 receiver

    HAKRC 35A miniF7 Fly Tower 第 2 张  BLS 35A ESC Specifications:

    Size: 31 30mm (20mm 20mm mounting hole)

    packing size: 64 64 35mm

    product net weight: 6g

    packing weight: 40g

    input voltage: 2S-6S Lipo

    galvanometer ratio: 300

    continuous current: 35A

    peak current: 40A

    Electric Firmware: g-rev. 16.7-Multi

    protocol support: PWM, Oneshot125, Oneshot42, Multishot, 

    DSHOT150, DSHOT300, DSHOT600